Install Official Factory Firmware UEKMM in Samsung Galaxy Tab 10.1 P7510

Sanjana February 8, 2012 0

We had already covered the detail procedure on how to root Samsung Galaxy Tab 10.1. For those of you who have already rooted your tab might have noticed that rooting voids the warranty. Well now you can update your Samsung Galaxy Tab 10.1 GT-P7510 with the default factory firmware and thus reclaim back the lost warranty. This Stock firmware is otherwise known as UEKME Honeycomb release and is only applicable for Samsung Galaxy Tab 10.1 bearing model number P7510.

galaxy tab 10.1

We wont be responsible for any harm caused to your device during the updation procedure that is unlikely to happen if you follow the instructions carefully. The updation procedure is not recommended for basic users but is for advanced users and is only applicable to Samsung Galaxy Tab 10.1 P7510 tabs that are network unlocked. Do not apply it in any other device as it might not be reversible and may harm the device by blocking it.

Pre-Requisites:

You ought to backup all user data present in your tab since chances of data loss or corruption are there. Having a backup will enable you to replace the lost data if any damage occurs. Follow the link posted below to backup and restore all your data easily.

Pre Upgrade Instructions for Rooting and Firmware Update

Must Have:

Download P7510UEKMM zip Package

Steps to Update Official Factory Firmware UEKMM in Samsung Galaxy Tab 10.1 P7510:

Step-1: Enable USB Debugging in your tab from the path “Settings > Applications > Development > USB debugging”. Make sure to tick the option of USB Debugging.

enable usb debugging

Download all the tools mentioned in the Must Have section to your computer and extract it. Match the extracted files with the image given below and if a single file is found to be missing check with the downloading and extraction process.

galaxy tab 10.1 update files


Step-2: Open Odin executable file in your computer and power off your tab to enter into Download mode by pressing Volume Down key and while holding it, simultaneously press Power button. If the device boots into Normal mode then re-try to enter into Download Mode by the same process till you are finally there.

galaxy tab 10.1 update

Step-3: When the tab powers on chose the option of  “Downloading” and press Power button to enter Download mode. Once you enter into download mode connect your tab to the computer via USB Cable while keeping the ODIN opened. Now the drivers will get installed and ID: COM will turn yellow indicating that you can now proceed to the next step.

update galaxy tab 10.1

Step-4: Click on “PDA” and select the file named as “P7510XABKMN_P7510UEKMM_HOME.tar.md5”. Tap on “Start” to begin the firmware updation pocess after which the device will reboot indicating successful updation. As soon as you see the home screen, power off the tab to enter into  Recovery mode.

galaxy tab 10.1 update

Step-5: The Recovery Mode can be entered by using by pressing Volume Up key and while holding it, simultaneously press Power button. If the device boots into Normal mode then re-try to enter into Recovery Mode by the same process till you are finally there.

galaxy tab recovery

In Recovery mode, select “Wipe data/factory reset” > “Wipe Cache partition” and select “yes” so that both the options are processed.

Thus you can easily update your Samsung Galaxy Tab 10.1 P7510 tab with the default factory firmware by following the steps mentioned above carefully.

Leave A Response »