Tutorial to Install Official DDLA1 Gingerbread 2.3.6 Firmware in Samsung Galaxy S5570I

Sanjana February 6, 2012 0

A new version of Gingerbread 2.3.6 firmware has rolled out for Samsung Galaxy POP S5570I users. It is to be noted that this is the official firmware for Indian users but users from other parts of the world can also apply this update as this is a global update. This new Gingerbread 2.3.6 is known as DDLA1 firmware. You do not require to root your smartphone to apply this update and if you have already rooted your smartphone from before, then the rooting access will get cancelled after applying this update.

 

samsung galaxy pop

We wont be responsible for any harm caused to your device during the updation procedure that is unlikely to happen if you follow the instructions carefully. The updation procedure is not recommended for basic users but is for advanced users and is only applicable to Samsung Galaxy POP S5570I smartphones that are network unlocked. Do not apply it in any other device as it might not be reversible and may harm the device by blocking it.

Pre-Requisites:

You must backup all user data present in your phone since chances of data loss or corruption are there. Having a backup will help you replace the lost data if any damage occurs. Follow the link posted below to backup and restore all your data easily.

Pre Upgrade Instructions for Rooting and Firmware Update

Must Have:

Download Galaxy POP Gingerbread Zip package

Steps to Update Official DDLA1 Gingerbread 2.3.6 Firmware in Samsung Galaxy S5570I:

Step-1: Enable USB Debugging in your phone from the path “Settings > Applications > Development > USB debugging”. Make sure that USB Debugging option is ticked

enable usb debugging

Download Galaxy POP Gingerbread Zip package from the Must Have section to your computer and extract the file at the same location. After extraction is complete, match the files with the image given below and if a single file is found missing then check with the downloading and extraction of files.

update galaxy pop


Step-2: Open Odin in your computer and power off your phone to enter your device into Download mode by pressing Volume Down Key + OK button and holding both press Power button simultaneously. Once you enter into download mode connect your phone to the computer via USB Cable while keeping the ODIN opened.

update galaxy pop

Step-3: Now the drivers will get installed and ID: COM will turn yellow indicating that you can now proceed to the next step. It may take 3-4mins for the ID:COM block to install all the drivers hence wait till the process completes. Dont proceed to the next step if the ID:COM block doesn’t turn yellow.

update galaxy pop

In case the ID: COM doesn’t turn yellow then you need to install Samsung USB Drivers, .NET Framework and update KIES with the latest version so that the missing drivers get installed.

Step-4: Click on “OPS” in Odin then tick on “One Package” tab and select the the file named “S5570IDDLA1_S5570iODDLA1_S5570IDDLA1_HOME.tar.md5”  then tap on “Start” to begin the firmware updation process.  Wen the phone gets updated, it will restart and you will be prompted to enter the Google Account credentials in your phone. Disconnect the USB Cable after it is done.

update galaxy pop

In case there is any interruption,  re insert the battery and follow the instructions again from the beginning.

Step-5: Users getting force close errors after applying this update should power off their phone to enter into Recovery mode. The Recovery mode can be entered by pressing Volume Down Key + OK button and holding both press Power button simultaneously. In Recovery mode, select “Wipe data/factory reset” > “Wipe Cache partition” then reboot your device by selecting the option of ‘Reboot system now’.

Thus you can easily update your Samsung Galaxy POP S5570I smartphone with the latest version of Official DDLAGingerbread 2.3.6 version by following the steps mentioned above carefully.

Leave A Response »