Samsung Galaxy Pro B7510 users can now update their smartphone with an all new firmware. This new update is known as XXKPB Gingerbread 2.3.6 firmware. It is not the official firmware released by Samsung Electronics but is the beta leaked version. This firmware comes with a number of changes and we will be checking out the detail change log of this update in a while.
We wont be responsible for any harm caused to your device during the updation procedure that is unlikely to happen if you follow the instructions carefully. The updation procedure is not recommended for basic users but is for advanced users and is only applicable to Samsung Galaxy Pro B7510 smartphones that are network unlocked. Do not apply it in any other device as it might not be reversible and may harm the device by blocking it. Let’s take a look at some of the changes that come with this update. Change Logs:
- Battery Optimization is better
- UI is faster with better speed
- Cut, Copy and Paste features have been included
- Firewall IP Settings have been modified and renewed
- New icon sets have been introduced
- Music Player is improved
Pre-Requisites: Backup all the user data present in your phone since chances of data loss or corruption are there. Having a backup can help you replace the
Steps to Update Gingerbread 2.3.6 Firmware in Samsung Galaxy Pro: Step-1: Download Gingerbread 2.3.6 Firmware Package from the Must Have section to your computer and extract the file at the same location. After extraction is complete, match the files with the image given below and if a single file is found missing then check with the downloading and extraction of files.
Step-2: Open Odin in your computer and enable USB Debugging Mode in your phone from the path “Settings > Applications > Development > USB debugging”. Make sure to tick on USB Debugging option.
Step-3: Power off the phone to enter into Download Mode by pressing Q and Power button simultaneously. Once you enter into download mode connect the phone to the computer via USB Cable while keeping the ODIN opened.
Step-4: Now the drivers will get installed and ID: COM will turn yellow indicating that you can now proceed to the next step. It may take 3-4mins for the ID:COM block to install all the drivers hence wait till the process completes. Dont proceed to the next step if the ID:COM block doesn’t turn yellow.
In case the ID: COM doesn’t turn yellow then you need to install Samsung USB Drivers, .NET Framework and update KIES with the latest version so that the missing drivers get installed. Step-5: Click on “OPS” in Odin and choose the file named as “” then tick on “One Package” tab. Now select the file named as “B7510XXKPB_B7510XXKP3_B7510XXOXAKP4_HOME.tar.md5”. After the files are selected tap on “Start” to begin the firmware updation process. It will take about 10 – 15 minutes for the update to complete.
Step-6: Wait till the phone gets rebooted after which you will be prompted to enter the Language Settings and Google Account Credentials. To confirm whether the firmware has been successfully applied or not navigate to the path “Applications > Settings > About Phone” where you will discover the firmware version as XXKPB 2.3.6 Gingerbread version. If you face any issues during the firmware updation process or if the process gets interrupted somewhere in the middle you ought to reapply the entire updation process again from the beginning. Restore back the data that you had previously backed up so that you can use all the services easily like before. Thus you can easily update your Samsung Galaxy Pro B7510 smartphone by following the steps mentioned above carefully.